0

Global Outbound Route For Multi-Tenant FusionPBX

Posted by simon on 2020-07-29 in Guides |

Create an outbound route as you normally would (on any of the domains) After it has been saved, go into the newly created outbound route Change the Domain from your selected domain to Global Change the Context from your selected domain to ${domain_name} Save the changes Go into Status -> SIP Status and click Flush […]

1

Installing WMIC on Ubuntu 16.04

Posted by simon on 2017-07-17 in Guides |

Step 1 – Install building applications sudo apt-get install autoconf make gcc libdatetime-perl build-essential g++ python-dev Step 2 – Download the ‘wmic’ source cd ~ wget http://www.opsview.com/sites/default/files/wmi-1.3.16.tar_.bz2 Step 3 – Untar the source tar -xvf wmi-1.3.16.tar_.bz2 Step 4 – Go into the directory cd wmi-1.3.16 Step 5 – Edit Samba/source/pidl/pidl and remove Line 583 nano […]

5

Change Ricoh Printer Protocol To Connect To Windows Server

Posted by simon on 2016-11-25 in Guides |

Open command prompt / terminal telnet into the ricoh printer telnet (IP) telnet 10.0.0.36 Login with the default admin username and password (admin – NO PASSWORD) RICOH Maintenance Shell. User access verification. login:admin Password: User access verification … OK. RICOH Aficio MP C3002 Network Control Service Ver. 11.103 Copyright (C) 1994-2015 Ricoh Co.,Ltd. All rights […]

0

Installing WMIC on Ubuntu 14.04

Posted by simon on 2016-06-08 in Guides |

Step 1 – Install building applications sudo apt-get install autoconf make gcc Step 2 – Download the ‘wmic’ source cd ~/Downloads wget http://www.openvas.org/download/wmi/wmi-1.3.14.tar.bz2 Step 3 – Untar the source tar -xvf wmi-1.3.14.tar.bz2 Step 4 – Go into the directory cd wmi-1.3.14 Step 5 – Compile and grab a butty as will take a few minutes […]

0

Setting up AutoSSH for Reverse SSH Forwarding

Posted by simon on 2015-07-20 in Guides |

Autossh is a brilliant little application I discovered and it has helped me access servers that are behind NAT firewalls Basically, Server A connects to a Server B in the cloud using SSH public keys, and asks Server B to forwards a port to the local SSH port on Server A SETUP SSH KEYS TO […]

0

How to Mount and Browse a LVM qcow2 Image

Posted by simon on 2015-06-29 in Guides |

This guide will show you how to mount a qcow2 image and also browse the qcow2 image if it is an LVM partition You need to add the nbd module to your machine modprobe nbd max_part=63 You then need to mount the qcow2 image to the NDB device driver qemu-nbd -c /dev/nbd0 /path/to/image.qcow2 You can […]

0

Setup ClamAV on CentOS 6 and Perform Daily Scans

Posted by simon on 2014-11-19 in Guides |

Hi All, This post is about Setting up ClamAV on CentOS 6 and Performing Daily Scans of the Machine and being Alerted by email if anything is found Setup a CentOS 6 Machine, look for a guide yourselves, sorry 🙁 Add the EPEL to the Machine i386 rpm -Uvh http://dl.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm x86_64 rpm -Uvh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm Next […]

Copyright © 2014-2021 Simon Smith All rights reserved.
This site is using the Desk Mess Mirrored theme, v2.5, from BuyNowShop.com.